Problem
How do I use the equipment available to reserve in the Podcast Studio?
Environment
The article applies to users of the Podcast Studio room in Beck 122.
Resolution
Starting a Podcast Recording
- Remove the plastic cover on the control board
- Insert the microSD card into the appropriate slot on the back of the control board. It will click into place
- If desired, use the available USB-C cable to connect a computer to the control board. This cable will not charge the computer
- Press the red button near the microSD card slot to power on the control board
- Every participant to be recorded should wear a set of headphones and sit with a microphone
- Test volume by speaking and adjusting the volume sliders on the control board accordingly for each participant
- Press the record button on the control board
Stopping a Podcast Recording
- Press the record button again to pause the recording, or Press and hold the record button to stop the recording
- Place headsets back on top of microphones at their respective stations
- Press the power button on the control board, and confirm the shutdown of the control board on the touch screen
- Push in to eject the microSD card from the control board
- Unplug (if applicable) your computer from the USB-C cable connected to the control board
- Place the cover on the control board
Cause
When users first enter the Podcast Studio room by themselves, this will provide a quick-start checklist. Reserving the Podcast Studio can be done at Podcast Room Scheduling.
Contact Us
If you would like further assistance, please contact us at helpline@gustavus.edu or call us at 507-933-6111.